|
The dimensions of the tipper body depends on the vehicle chassis measurements.
For different applications, please fill the request form.
The recommended volumes for the 6x4 chassis vehicles are 14 m3, 16 m3, 18 m3 and 20 m3
The recommended volumes for the 8x4 chassis vehicles are 20 m3, 22 m3, 24 m3 and 26 m3
Chassis:
8 mm thickness made of ST 44 steel, U-construction.
Inner reinforcement 8 mm. thickness made of ST 44 steel.
Torsion cross-members on the rear of the chassis.
The rear rotative arm made of 1040 hardness steel and the diameter is 85 mm.
Tipper body
Body : ST 52 steel sheet (Made in Turkey-Eregli)
Floor thickness : 8 mm ST 52 steel sheet
Side walls thickness : 6mm ST 52 steel sheet
Front Wall thickness : 6 mm ST 52 steel sheet
Tailgate thickness : 6 mm ST 52 steel sheet
Shelter thickness : 6 mm ST 37 steel sheet.
The operating system of the tailgate is manual. Opening both on rear and side.
Hydraulic System
Four stages heavy duty cold-drawn telescopic cylinder.
Hydraulic oil tank capacity: 110 lt.
Dual speed downloading valve, limit-check security valve.
35x85 DPA gear pump
PTO: original, mounted on the vehicle
Painting:
Before the painting, the body is washed with special chemicals to purify the waste materials and cleaned by sand blasting method.
After the pasting on the necessary surfaces of the body, the two-coat epoxy primer and two-coat water-based paint is applicated on the body.
All painting applications are made in the painting cabin.
Standard Accessories:
Mud guards above the rear axles. (steel)
Mud flaps with Arslan Damper logo
Tool box (steel)
Hooks welding on the side-front walls and tailgate for the tarpaulin
Reflector on the tailgate.
Water tank
Ladder on the right side.
Side bars
Options:
Hydraulic opening tailgate.
|
