|
This type of tipper is suitable for the transportation of the scrap materials.
Tipper body
Floor thickness : 5 mm HARDOX 450
Side walls thickness : 4 mm ST 52 steel sheet
Tailgate thickness : 4 mm ST 52 steel sheet
Front Wall thickness : 4 mm ST 52 steel sheet
Reinforcements : 4 mm ST 52 steel sheet
The operating system of the tailgate is manual. Side opening.
Dimensions:
Inner length : 9750 - 10250 mm.
Inner height : 2350 mm.
Inner width : 2300 mm.
Volume : 54 m3
Chassis frame:
8 mm thickness made of ST 52 steel, I-construction.
Cutting edge: 120/14 mm. – 120/16 mm.
2” kingpin (DIN and SAE standards)
25 tonnes dynamic, 50 tonnes static mechanical landing gear.
Rear bumper (EEC 97/19)
Axles:
3x12 tonnes capacity.
There are brake shoes and heavy brake levers.
Dual lifting axles.
Suspension:
Parabolic double deck Z springs.,
Tyres and Rims:
385/65 R22,5 tyres 6+1
11,75 x 22,5 rims 6+1
Hydraulic System
Five stages heavy duty cold-drawn telescopic cylinder.
Seven stages heavy duty cold-drawn second telescopic cylinder.
Hydraulic oil tank capacity: 180 lt.
Dual speed download valve, limit-check security valve.
35x85 DPA gear pump
Brakes:
Twin-line airbrake system compliance with EEC 98/12 standards.
EBS (2S/2M sensor)
Roll Stability Support (RSS) against rolling of the trailer.
4 spring brake chambers and 2 service brake chambers.
Electrics and lightning:
Compliance with SAE standards and TÜV regulations.
Electricity is provided by 15 pin socket compliance with EEC 97/28 or 2x7 pin socket compliance with ISO 12098.
Brake lights, number plate lights, yellow side lights, the fuses mounted in the fusebox
Painting:
Before the painting, the body is washed with special chemicals to purify the waste materials and cleaned by sand blasting method.
After the pasting on the necessary surfaces of the body, the two-coat epoxy primer and two-coat water-based paint is applicated on the body.
All painting applications are made in the painting cabin.
Standard Accessories:
Mud guards above the rear axles. (plastic or steel)
Mud flaps with Arslan Damper logo
Tool box (plastic)
Plastic saddle.
Spare tyre conveyor.
Hooks welding on the side-front walls and tailgate for the tarpaulin
Reflector on the tailgate.
Water tank
Ladder on the right side.
Tonnage device.
Side bars
|
